Mounting Surfaces (Fastening Of An Axis Or Customer Equipment) - ABB FlexPLP IRPLP 220 Product Manual

Table of Contents

4 Installation and commissioning

4.2.3 Mounting surfaces (fastening of an axis or customer equipment)

Mounting surfaces

For all axes have the same structure, the mounting surface of the horizontal and

vertical axis carriages are the same. It includes eight Ø9 through holes and four

Ø8H7 through holes for the fastening of another axis or the customer equipment.

xx1800002127

For vertical axis, the mounting surface for customer equipment has another option

where the payload is mounted on the flange. The flange includes an area (the

shadowed area in the figure below) where the holes can be drilled according to

the customer requirements.

xx1800002128

Product manual - FlexPLP IRPLP 220

3HAW050041018-001 Revision: C

Table of Contents