Mechanical Installation; Introduction - ABB FlexPLP IRPLP 220 Product Manual

4 Installation and commissioning

4.2.1 Introduction

4.2 Mechanical installation

4.2.1 Introduction
Overview
The FlexPLP IRPLP 220 can be mounted on a floor plate, a tooling frame or another
FlexPLP IRPLP 220. The following picture shows the mounting surfaces.
xx1800002123
Item
A
B
58
Name
Base body
Mounting surface of FlexPLP
IRPLP 220 carriage
Note
FlexPLP IRPLP 220 must be mounted on a machined flat surface.
Carefully check the work area of FlexPLP IRPLP 220 before setting the system
into service. Make sure that the area is free of all personnel when the unit moves.
Also check that no object is located on the cover plates of FlexPLP IRPLP 220.
WARNING
Cables and pipes must not be in contact with moving parts.
© Copyright 2016 - 2018 ABB. All rights reserved.
Description
The base body can be installed on a floor plate,
a tooling frame or another FlexPLP IRPLP 220.
Tools, fixtures or another FlexPLP IRPLP 220
axis can be mounted on it.
Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C