Table of Contents
Advertisement
Removal: Joint #5 Motor
1. Turn OFF the Controller power.
2. Remove the Arm #4 side cover.
For details, refer to Maintenance: 3. Covers.
3. Loosen the screws fixing the cable protection bracket on the Arm
#4 and pull out the cables.
Hexagon socket head cap bolts: 2-M4×10
4. Remove the brake power supply connected to the connector
(BR052) from the plate.
Cross recessed head screw with captive washer: 2-M3×6
5. Disconnect the following connectors.
Connector: X052, X152, BT52, BR052
6. Remove the air tube fitting located in the front of the Joint #5
motor unit.
C8 Rev.13
Maintenance 9. Joint #5
275
Advertisement
Table of Contents
