Table of Contents
Advertisement
For environmental conditions regarding space when placing the Controller on the base table,
NOTE
refer to the Robot Controller manual.
When using the Manipulator in the cleanroom, follow the steps below before the installation.
(1) Unpack the Manipulator outside of the cleanroom.
(2) Secure the Manipulator to delivery equipment such as a pallet with bolts so that the
(3) Wipe off the dust on the Manipulator with a little alcohol or distilled water on a lint-
(4) Transport the Manipulator into the cleanroom.
(5) Secure the Manipulator to the base table.
C8 Rev.13
Manipulator does not fall over.
free cloth.
Setup & Operation 3. Environment and Installation
39
Advertisement
Table of Contents
