Service - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Table 3-23
Preset Parameter
Properties: IP Address
Properties: AE Title
Properties: Port Number
Properties: MAC Address
To ping a device,
1.) Select the device.
2.) Press Ping. If the smiley face smiles, then the connection has been confirmed. If the smiley face
frowns, then the connection has not been made. Check the device name and IP address.
3-12-6

Service

For each Device that you added to the system, you need to set up the service(s) that device supports
(you must be an administrator to update these screens).
The Services screen has the following sections of information:
1.) Destination Device - lists information about destination devices. You can select from a list of
currently existing devices.
2.) Service Type to Add - lists information about services for the destination device. You can add
services, select from a list of currently existing services, and remove services.
3 DRAFT (N
Device
Type the device's IP address.
AE Title of the LOGIQ S8. NOTE: Only available for MyComputer.
IP Port Number Used for DICOM, set by default to 104. NOTE: Only available for MyComputer.
Unique network card address. NOTE: Only available for MyComputer.
Figure 3-27 Connectivity Services Preset Menu, My Computer
Figure 3-28 Connectivity Services Preset Menu, New Device
Chapter 3 - Setup Instructions
17, 2011)
OVEMBER
Description
LOGIQ™ S8
S M
ERVICE ANUAL
3-47