Separating Dc4D Unit From Cps - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
NOTE: Inserting EEPROM in wrong direction will result in permanent damage to EEPROM or to GFS board.
Proceed with caution.
6.) Verify tips of all 8 pins are aligned with U32 socket.
7.) Gently push down EEPROM to its position.
8-15-4-5

Separating DC4D Unit from CPS

1.) Unscrew 14 screws to remove the CPS Cover.
2.) Unscrew five screws to remove the DC4D from the CPS Assy.
3 DRAFT (N
Figure 8-59 Removing the CPS Cover
Figure 8-60 Removing the DC4D from the CPS Assy
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL
8-51