Installation Procedure - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
2.) Loosen the two screws behind of removed "1" and "ENTER" key.
3.) Insert Tool B and lift the A/N key base from OPIO frame.
8-14-5

Installation Procedure

1.) Carefully place the appropriate key cap in position on the keyboard, taking care to place the plastic
alignment pin in the correct position so that the key cap is the right way up and reads correctly.
2.) Push the key cap down until it snaps into position.
8-40 Section 8-14 - Replacement of Key Caps (by special native language keys)
3 DRAFT (N
Figure 8-43
Figure 8-44
Figure 8-45
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL