Brightness/Contrast; Brightness; Contrast - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Table 6-2
4
5
Note : 1280 x 1024, 60Hz
6-3-1

Brightness/Contrast

6-3-1-1

Brightness

Adjusting the monitor's contrast and brightness is one of the most important factors for proper image
quality. If these controls are set incorrectly, the Gain, TGC, Dynamic Range and even Acoustic Output
may have to be chaged more often than necessary to compensate.
The proper setup displays a complete gray scale. The lowest level of black should just disappear into
the background and the hightest white should be bright, but not saturated.
1.) Adjust the BRIGHTNESS by pressing the < LEFT or RIGHT> button to decrease/increase value.
6-3-1-2

Contrast

1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the Picture -> Contrast by pressing the < LEFT or RIGHT > button to decrease/ increase
cursor and the MENU (middle) key.
3.) Adjust the CONTRAST by pressing the < LEFT or RIGHT > button to decrease/increase the value.
3 DRAFT (N
Main Menu
OSD
Exit
Figure 6-2 Brightness Adjust
Chapter 6 - Service Adjustments
17, 2011)
OVEMBER
Sub Menu Range
English/German/
French/Spanish/
Italian/Swedish/
Language Chinese/Japanese
H-Position 0~100%
V-Position 0~100%
Half Tone 0~100%
LOGIQ™ S8
S M
ERVICE ANUAL
Setting for
LOGIQ™ S8
English
50%
50%
50%
6-3