Sleep Mode Check - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
4-3-3-2

Sleep Mode Check

NOTE: This procedure assumes systems is already up and running.
1.) Press the ON/OFF button (see:
2.) Select the Sleep button. The system performs sequence to go to SLEEP mode.
NOTE: System resumes when user press Power ON/OFF switch. Boot time is about 90 seconds.
Sleep mode is not intended to replace the shutdown process.
WARNING WARNING
The system should be fully shutdown every day.
!! WARNING:
You need to wait at least one minute after the monitor blacks out before unplugging the pwer
CAUTION
cable. The system is still in the process of going into Sleep Mode after the monitor blacks out.
!! CAUTION:
3 DRAFT (N
Figure
Figure 4-12 Power OFF User Interface
Chapter 4 - Functional Checks
17, 2011)
OVEMBER
4-11) on the control panel. Following dialog appears.
LOGIQ™ S8
S M
ERVICE ANUAL
4-13