Removal Procedure - Cable Hook - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
8-22-3-2

Removal Procedure - Cable Hook

1.) Remove two screws from Cable Hook as shown below
2.) Remove 1 screw from Side Rear Hook
NOTE: Make sure not to loose washers when removing hooks.
8-82 Section 8-22 - Replacement of the Probe Holder(Kit), Cable Hook, and Extended probe holder
3 DRAFT (N
Figure 8-107 Cable Hook
Figure 8-108 Side Rear Hook
17, 2011)
OVEMBER
.
.
LOGIQ™ S8
S M
ERVICE ANUAL