Installation Procedure; Functional Check - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
3.) Remove the printer USB and power cable connectors from the printer.
Figure 8-101 Remove printer USB and power cable connectors from printer
8-21-2-4

Installation Procedure

1.) Parts to be installed in reverse order of removal.
8-21-2-5

Functional Check

Test 1: Print an image by pressing the button P1 on the operator panel. (P1 key should be configured
correctly)
Verify1: - Verify that image can be printed.
Verify2: - Verify that printed image has no distortion as compared the image on screen.
8-78
3 DRAFT (N
Section 8-21 - Replacement of Peripheral Cable Assy
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL