Overview; The Purpose Of Chapter 3; Set Up Reminders; Average Installation Time - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Chapter 3
Setup Instructions
Section 3-1

Overview

3-1-1

The Purpose of Chapter 3

This chapter contains information needed to setup the LOGIQ™ S8 ultrasound system. Included are
procedures to receive, unpack and configure the equipment.
A worksheet is provided (see:
is available, prior to setup the system.
Table 3-1
Section
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
Section 3-2

Set Up Reminders

3-2-1

Average Installation Time

Once the site has been prepared, the average installation time required is shown in
Table 3-2
Unpacking the scanner
Installing the scanner / options / printers
DICOM Option (connectivity)
3 DRAFT (N
page 3-49
Contents in Chapter 3
Overview
Set Up Reminders
Receiving and Unpacking the Equipment
Preparing for Set Up
Connection of Auxiliary Devices
Completing the Set Up
Printer Installation
System Configuration
Available Probes
Software/Option Configuration
Connectivity Setup
Configuring Connectivity
Connectivity Setup Worksheet
Paperwork
Average Installation Time
Description Average Installation Time
Chapter 3 - Setup Instructions
17, 2011)
OVEMBER
to page 3-50) to help ensure that all the required information
Description
0.5 hours
0.5 to 1.5 hours
0.5 - 1.5 hours
LOGIQ™ S8
S
ERVICE
Page Number
Table 3-2
Comments
depends on required configuration
depends on configuration amount
M
ANUAL
3-1
3-1
3-4
3-8
3-10
3-21
3-28
3-34
3-38
3-40
3-41
3-44
3-49
3-51
below.
3-1