Connecting The Footswitch - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
3-5-5

Connecting the Footswitch

The footswitch should be directly connected to any accessible USB-port on the LOGIQ™ S8 (e.g., on
rear of the system).
NOTE: Connection of the Footswitch is always the same
(no differences between PC-Motherboard version of the system).
After physical connection, adjust the Footswitch (Left/Right) as described in
Section 3-8-1-8 "How to adjust function of the Footswitch (Left/Right)" on page
3-18
3 DRAFT (N
Figure 3-9 Connection Scheme - Footswitch
Section 3-5 - Connection of Auxiliary Devices
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL
3-39.