Replacement Of Rear Handle; Manpower; Tools; Removal Procedure - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Section 8-17

Replacement of Rear Handle

8-17-1

Manpower

1 person, 10 min.
8-17-2

Tools

Hex Wrench.
8-17-3

Removal Procedure

1.) Remove Rear Cover.
2.) Remove 3 cap screws.
Rear Handle will not stay in position without screws. Make sure not to drop the part when
CAUTION
removing/installing Rear Handle
!! CAUTION:
8-17-4

Installation Procedure

1.) Parts to be installed in reverse order of removal.
8-17-5

Functional Check

Visual Check only.
8-58
3 DRAFT (N
Figure 8-69 Rear Handle
Section 8-17 - Replacement of Rear Handle
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL