GE LOGIQ S8 Service Manual page 265

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Section 8-26
Replacement of the Monitor Arm
NOTE: Some of the photos resembles consoles other than LOGIQ™ S8, but Monitor Arm is common part as
Polaris Platform and therefore, service procedure is the same.
8-26-1 Manpower
One person, 5 minutes.
8-26-2 Tools
Phillips screwdriver, Nipper.
8-26-3 Removal Procedure
1.) Unscrew 1 screw, then remove the 3rd arm cover. Refer to the figure below.
2.) Remove the 2nd arm cover. Refer to the figure below.
3 DRAFT (N
Figure 8-129 Removing the 3rd arm cover
Figure 8-130 Removing the 2nd arm cover
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL
8-97