Lcd Monitor Adjustment - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Section 6-3

LCD Monitor Adjustment

The LOGIQ™ S8 has a free adjustable LCD monitor in relation to the user interface.
The digital control panel is located at the front of the color monitor. It is NOT recommended to change
the pre-adjusted settings. However, if you are not satisfied with the factory settings, use these
controls to program those you prefer in each resolution.
NOTE: All changed values will only be saved by selecting "Exit" from the OSD.
If not, the adjusted values will be lost after loss of power.
Table 6-2
1
2
3
6-2
3 DRAFT (N
Figure 6-1 Monitor Adjustment buttons
Main Menu
Picture
Colortemp/Gamma
Colortemp/Mode
Not Used
Function
Information
Memory Recall
Section 6-3 - LCD Monitor Adjustment
17, 2011)
OVEMBER
Sub Menu Range
Contrast 0~100%
Brighness 0~100%
Select 2.2 or 2.4
9000K/11000K/
13000K/15000K/
USER
Scale Full/5:4/Native
SBC ON/OFF
LOGIQ™ S8
S M
ERVICE ANUAL
Setting for
LOGIQ™ S8
100%
80%
2.4
13000K
Full
Factory Default
ON