GE LOGIQ S8 Service Manual page 264

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
7.) Remove 1 screw holding Ground Wire (Green Wire).
8.) Remove 8 screws holding Speaker
8-25-4 Installation
1.) Parts to be installed in reverse order of removal.
8-25-5 Functional Check
Perform Diagsnotics
1.) Enter Common Service Desktop
2.) Select Diagnostics -> Service Diag -> Doppler Audio -> Execute
Make sure audible sound comes out of the speaker
NOTE: Make sure system volume is not set to zero.
8-96
3 DRAFT (N
Figure 8-128 Removal screws of Speaker
Section 8-25 - Replacement of the Speaker
17, 2011)
OVEMBER
.
LOGIQ™ S8
S M
ERVICE ANUAL