Up-D897 - Printer Settings - GE LOGIQ S8 Service Manual

GE H RAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
3-7-4-1

UP-D897 - Printer Settings

1.) Call up the 'Printer Preferences'; operation see:
2.) Select the
-
-
-
3.) Select the
-
-
4.) For saving the adjusted printer settings click APPLY and then OK.
Finally close the 'Printers' -window with the close button and exit System Setup with SAVE&EXIT.
5.) Assign the Printer to the remote keys P1, P2, P3, P4, P5 and/or P6;
see:
3-30
3 DRAFT (N
page (see:
LAYOUT
Paper: 960x1280
Orientation: Portrait
Interpolation Method: Bilinear
Figure 3-16 Layout + Density Adjust page
page (see:
DENSITY ADJUST
Gamma: TONE2
Sharpness = 0; Dark = 0; Light = 0 ; Sharpness = 2
Section 3-7-5 "Remote Control Selection" on page
Section 3-7 - Printer Installation
17, 2011)
OVEMBER
Section 3-7-4 "Adjustment of Printer Settings"
Figure 3-16 below) and select:
Figure 3-16 above) and select:
3-37.
LOGIQ™ S8
S M
ERVICE ANUAL
.