System Software - Installation/Upgrade Procedure; Introduction; Manpower; Tools - GE LOGIQ S8 Service Manual

GE H DRAFT
EALTHCARE
D 5394227, R
IRECTION EVISION
Section 8-2

System Software - Installation/Upgrade Procedure

8-2-1

Introduction

This section describes procedure to install/upgrade software to system.
8-2-2

Manpower

One person ~ 1 hour (depends on contents of System DVD, peripherals, etc.)
8-2-3

Tools

System DVD
8-2-4

Preparations

Before performing the Software Upgrade:
• make sure that all system functions are working correct
• check the current Application Software version and the installed Options
8-2-5

Software Installation from DVD

8-2-5-1

System Software - Installation Procedure

1.) Prepare the Base System Software DVD.
2.) Power ON the scanner.
3.) Press DVD-Drive eject button.
4.) Place the Base System Software DVD on the tray.
5.) Wait few moments for DVD drive to read DVD contents.
6.) The notification screen appears, and then hit the Enter key.
7.) Select either
[A] "Load the complete disk", or
[B] "Load the bootable C: partition"
and hit the Enter key.
3 DRAFT (N
Chapter 8 - Replacement Procedures
17, 2011)
OVEMBER
LOGIQ™ S8
S M
ERVICE ANUAL
8-3