3-3-4 Mark Counter
Sample
0001
0002
Initial value (Init)
End value (End)
Step
Counter source (Source)
Displayed number of digits (Figure) :
Display leading zeros (Zero Indi.)
Type of base number
Set the counters shown above.
1. Set the counter.
2. Input the function character of the counter.
3. Set the conditions of the function character of the counter and laser.
Refer to "3. Set the marking layout" (P.85) and "4. Set the laser condition" (P.86) in "3-2-3 Set the marking
data" (P.83).
Reference
• For details on the counter function, refer to"4-9-2 Counter" (P.164).
...
0003
0998
:
1
:
1000
:
1
:
Trigger signal
4
:
Enable
:
Base-10 (Decimal) number system
ME-LP400V-OP-6
0999
1000
0001
0002
101