4-11-2 Detail Adjustment (Laser Setting)
The following fine adjustments are allowed.
Description
1
Edge (Edge Adjustment) :
Adjust the edge of line in the character to be marked.
Though setting a small value here can shorten the marking time, the line edge becomes dull.
Setting large value makes the edge thick.
Setting Range
Initial Value
Small
2
Curve (Curve Adjustment) :
The shape of curve line in the character to be marked is adjusted.
Though setting a small value here can shorten the marking time, the curve line is distorted.
Setting large value makes the edge thick.
Setting Range
Initial Value
Small
3
Waiting Time (Waiting Time Adjustment) :
Adjusts the waiting time for starting radiation at the start point of each line.
Apply to all line segment.
Setting a large value improves the marking disorder.
Too large value, however, makes the marking time longer.
Setting Range
Initial Value
1
2
3
4
0 to 100
0
Round Edge
0 to 100
0
Curve Line Distorted
0 to 100
0
ME-LP400V-OP-6
5
6
7
Proper
Dark (Deep) Edge
Proper
Dark (Deep) Line
Large
Large
217