2. Input the marking contents.
Input the marking contents such as characters, code symbols, or logos. Here describes the procedure to input character
data "ABCD".
1.
Press [CHARACTER].
The screen is changed into the character setting one.
2.
Place the cursor on the first line (01), and press
[EDIT].
Re-adjusting the cursor to the first line (01), and then pressing
(double-clicking) the same cursor performs the same
operation.
3.
Press [ALPHA•NUM].
4.
Input [ABCD].
5.
Press [SET].
84
ME-LP400V-OP-6