Image Display Screen; Image Display - Panasonic LP-V Series Operation And Maintenance Manual

4-14 Image Display Screen

This is a screen for checking the image of character string/logo set in the character setting or condition setting.
Image checking before marking is effective to reduce any errors.
Position adjustment is also possible on this screen. Adequate position can be set by checking the image.

4-14-1 Image Display

2
Description
1 Image Screen :
Image-displays the marking content set previously.
2 Magnification :
Sets the magnification ratio of the image display.
Press the numeric part of the magnification to set the arbitrary magnification on the screen.
3 Image Display Zoom-in/Zoom-out :
The image can be zoomed in and out by 18 steps.
4 Center of Image Display :
Set the origin center to image display position.
5 Image Display Position :
Indicates where the current image is in the marking field.
6 Shift Display Position :
Shifts image display part up and down, left and right. Pressing arrow shifts the image display part.
7 Area No. *1 :
Displayed when marking on-the-fly is set in "Trigger setting".
It indicates the order of the marking field for the concatenated marking to flying object.
Press [+] or [-] to select the desired area number. The image corresponding to the selected Area No. is displayed.
Refer to "Concatenated Marking Setting" (P.226).
8 Auxiliary Line *1 :
Auxiliary line used for setting marking to flying object.
Refer to "Concatenated Marking Setting" (P.226).
9 Object (Adjustment Object) :
Select the object to be fine adjusted.
The data which shows in red character or image on the window is the selected object.
3 4
1
8
ME-LP400V-OP-6
5
6
7
9
10
11
239