Panasonic LP-V Series Operation And Maintenance Manual page 118

1. Set the conditions of the on-the-fly marking.
1.
Press [TRIGGER].
2.
Set "RIGHT" to [Moving Direction].
The work is marked to the direction shown in the following
figure.
"RIGHT"
Notice
• Set the marker head in vertical against the work flow direction.
Reference
• Refer to "4-12 Trigger Setting" (P.219) for the work moving direction.
3.
Set "Trigger Marking" to [Trigger].
118
"RIGHT"
ME-LP400V-OP-6
"RIGHT"