Panasonic LP-V Series Operation And Maintenance Manual page 39

Item
Required time for laser
pumping
Power voltage
100V AC
Power
consumption *9
200V AC
Grounding method
Cooling method
Ambient temperature *10
Ambient temperature for
storage *10
Ambient humidity *10
Overvoltage category
Pollution degree
Use location
Fiber cable length
Head
Installation
direction
Controller
Head
Weight
Controller
Type
Battery
Model
(Embedded
Quantity
in product)
Weight
*1 : Average output power from the laser oscillator at delivery time with the laser power setting 100.
*2 : Work distance has an individual error of approx.+/-2 mm per product.
*3 : The descried values are available ranges for configuration. The marking quality may vary depending on materials of
marking objects and marking conditions.
*4 : Depending on the marking data, the available scan speed might be limited in case the continuous marking more than
1 minute with high scan speed is set.
*5 : For using SQRC, an optional software is needed. SQRC marking function is available only for use in Japan.
*6 : VEC is a graphic file format dedicated for the laser marker. To use HPGL, BMP or JPEG files, convert them to VEC
format with the attached "Logo Data Conversion software". To use AI or EPS files, convert them to VEC format with
the attached software "ExportVEC".
*7 : Check the performance and operation before use. USB media with security features cannot be used.
*8 : The power supply voltage switches automatically.
*9 : The typical value of the inrush current at system startup is 40A. (Duration time is 10 ms or less.)
*10 : This specification is applied to both controller and head. No condensation and freezing shall be allowed. If there is
a gap between the stored temperature and operating temperature, make sure to have the product get used to the
operating ambient temperature gradually prior to use to prevent the dew condensation.
LP-V10U
Approx. 20 sec.
90V to 132V AC or 180V to 264V AC (including ±10% voltage fluctuations) *8
390VA or less
420VA or less
Head: Direct Earth, Controller: Direct Earth
Head: Forced air-cooling, Controller: Forced air-cooling
Indoor; at an altitude of 1000 m or below
4.5 m, Minimum bent radius 60 mm
Vertically or Horizontally
Approx. 9 kg
Graphite Fluoride Lithium Battery
ME-LP400V-OP-6
Model
LP-V15U
Frequency: 50/60 Hz
0 °C to +40 °C
-10 °C to +60 °C
35 to 85%RH
Ⅱ
2
Omnidirectionally
Approx. 10 kg
Approx. 22 kg
BR-1 / 2AAC2P
1 piece
Approx. 9.5 g
LP-W052U
Approx. 15 sec.
310VA or less
360VA or less
Approx. 9 kg
39