Panasonic LP-V Series Operation And Maintenance Manual page 88

2. Radiate the laser for marking
1.
Press the laser pumping switch on the controller.
The laser pumping switch will be flashing in white. When the switch
is changed from flashing to lightning up, the laser marker is ready for
radiation.
(Flashing time: approx. 20sec.)
2.
Select [TEST] of the marking mode.
3.
The marking is started by pressing [START].
WARNING
88
• The laser beam is emitted. Be sure to use the protective goggle and enclosure
while dealing with the laser.
ME-LP400V-OP-6
Flashing to
lightning