Panasonic LP-V Series Operation And Maintenance Manual page 230

Mark "1234567890ABCDEF" with LP-435/LP-425/LP-V15 (Marking field: 160mm x 160mm)
First, set the character string to be marked on the character setting screen.
Set the character string with its width of the character string per one line should be around 106mm. (except the last area
number)
1st line: 12345678 (character string width: 112mm)
2nd line: 90ABCDEF (character string width: 112mm)
Next, set the marking condition of each line on the marking condition setting screen. The setting should be:
"Condition No. 1, Area No. 0" for the 1st line
"Condition No. 2, Area No. 1" for the 2nd line
Downstream
Moving direction: LEFT
1 2 3 4 5 6 7 8
Make sure that the width of the character string
should match with or go over the projection line on
the marking image screen.
Character condition of "12345" on the 1st line
Character condition No. 1
Character Height
Character Width
Character Interval
Reference
• Specify the character setting so that the last character in the character string should match with or go over the projection
line on the marking image screen. The projection line on the marking image screen indicates x 2/3 of marking field (starting
of the next marking field). (There may be the cases that the characters set outside of the guide line (the characters in the
upstream of moving direction) cannot be marked during low-speed operation.)
230
Upstream
: 12 X Position : -80
: 12 Y Position : 0
: 14 Area No. : 0
ME-LP400V-OP-6
Downstream
Moving direction: LEFT
9 0 A B C D E F
Calculate the start position of "9", which is the head
character of Area No. 1 on the X coordinate using the
following formula:
Formula: -80 + (character string width on the 1st line
-160mm x 2/3)
In this sample, the character string width on the 1st line
is 112mm, and therefore the calculation will be:
Starting position of the head character on the X
coordinate = -80 + (112 - 160 x 2/3) ≈ -75
Character condition of "67890" on the 2nd line
Character condition No. 2
Character Height
Character Width
Character Interval
Upstream
: 12 X Position : -75
: 12 Y Position : 0
: 14 Area No. : 1