Point Radiation Condition - Panasonic LP-V Series Operation And Maintenance Manual

4-10-6 Point Radiation Condition

Laser radiates in the specified coordinate for the setting time.
Reference
• Point radiation function can not be used in combination with the function of marking to flying object.
1
2
5
11
Description
1 Point Rad. No. (Point Radiation No.) :
Specifies up to 16 point radiation condition per one registered file.
Setting Range
2 X/Y Offset :
Shifts the object to X/Y direction for all radiation points in the selected point radiation No.
Setting Range
3 Laser Power Correction :
4 Laser Pulse Cycle Correction (Only LP-V series) :
Correction of all radiation points in the selected condition No. for the laser power / laser pulse cycle set at laser
setting.
If the correction rate is set to 0%, the marking image is displayed in gray and marking is not executed.
Setting Range of Laser Power Correction
Setting Range of Laser Pulse Cycle Correction
5 X/Y Position :
Shifts the object to X/Y direction for each radiation point.
Setting Range
212
9
8
0 to 15
-45.000 to +45.000 mm
-55.000 to +55.000 mm
-80.000 to +80.000 mm
-27.500 to +27.500 mm
-45.000 to +45.000 mm
-55.000 to +55.000 mm
-80.000 to +80.000 mm
-27.500 to +27.500 mm
3
4
6
7
10
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
0 to 200%
50 to 200%
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
ME-LP400V-OP-6