Selecting Marking Mode - Panasonic LP-V Series Operation And Maintenance Manual

4-6 Selecting Marking Mode

The marking mode is set on the operation screen for the following cases; test marking mode, starting and stopping guide
laser and dual pointer using.
1
Description
1 MARKING MODE:
Selects mode from either RUN or TEST.
In Operation screen, only RUN mode is available.
2 START:
Starts marking in the selected mode at "1".
3 STOP:
Stops marking.
4 INDICATE:
Displays the operating status of dual pointer and guide laser.
In Operation screen, Guide indication is not available.
2 3
ME-LP400V-OP-6
4
135