Operator Adjustable Items - Panasonic LP-V Series Operation And Maintenance Manual

4-4-2 Operator Adjustable Items

Select the items to give the permission of setting change in the environment setting screen of "4-16-1 Display Setting
(Environment 1)" (P.253).
Description of Changeable Items
X/Y Offset:
Sets X and Y offset values.
-45.000 to +45.000 mm
-55.000 to +55.000 mm
Setting Range
-80.000 to +80.000 mm
-27.500 to +27.500 mm
Laser Power:
Sets the laser power.
Setting Range 0.5 to 100.0
Scan Speed:
Marks value of scan speed.
1 to 12000 mm/s
Setting Range
1 to 6000 mm/s
Pulse Cycle (Only LP-V series):
Sets the laser pulse cycle.
Setting Range 10.0 to 50.0 ms
Line Speed / Line Speed Fine Adjustment:
Sets the line speed for marking to flying object.
Displayed with the setting of the marking to flying object without encoder. The fine adjustment of the line speed can be
set after starting the marking in run mode.
0.060 to 240.000 m/min
0.060 to 170.000 m/min
Setting Range
0.060 to 120.000 m/min
0.060 to 85.000 m/min
FILE:
Selects file No. Refer to "4-7-2 Change File No." (P.141) for setting method.
CHARACTER :
Set the marking characters in the lines that are permitted in the environment setting. Refer to "4-8-2 Character Input" (P.148)
for setting method.
SAVE:
Overwrites and registers the items changed on operator adjustment screen.
Refer to "4-7-3 Save" (P.142).
Laser Check :
Radiates the laser to the center of marking field by laser power set.
Refer to "Laser Check" (P.131)
130
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
(LP-430 / LP-420 / LP-410 / LP-435 / LP-425 /LP-V10 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
(LP-430 / LP-420 / LP-435 / LP-425 / LP-V10 / LP-V15)
(LP-410)
(LP-431 / LP-421 / LP-W052)
(LP-411)
ME-LP400V-OP-6