Panasonic LP-V Series Operation And Maintenance Manual page 223

(2) Equidistant Marking
Marking is repeated every time the line moves with the interval set in equidistant marking.
Equidistant marking is performed while the marking trigger is turned to ON.
Reference
• Equidistant marking on the flying object cannot be used in combination with rank marking, external offset, and serial
data marking function.
When the encoder is not used
(Encoder signal: invalid)
3
2
4
Description
1 Interval (Marking Interval)
Inputs the moving distance of the line for marking start.
Setting Range
2 Line Speed
Inputs the line speed. Available when encoder setting is disabled.
Setting Range
3 Delay Distance
Inputs the moving distance of line from trigger input to the start of marking.
Setting Range
Moving Direction
Sensor
Reference
• Set a delay distance shorter than a marking interval.
1
0 to 3000.0mm
0.060 to 240.000 m/min (LP-430 / LP-420 / LP-435 / LP-425 / LP-V10 / LP-V15)
0.060 to 170.000 m/min (LP-410)
0.060 to 120.000 m/min (LP-431 / LP-421 / LP-W052)
0.060 to 85.000 m/min (LP-411)
0 to 500.00mm
Delay Distance
A
Marking Interval
Marking Trigger ON
ME-LP400V-OP-6
When the encoder is used
(Encoder signal: valid)
4
5
A A
Marking Interval
1
6
223