Run Mode - Panasonic LP-V Series Operation And Maintenance Manual

4-6-4 RUN Mode

When the laser marker is activated in RUN mode, the Internal shutter is opened, and the laser marker is ready for receiving
trigger from external.
Before starting RUN mode, set the parameters in "4-12 Trigger Setting" (P.219).
1.
Set the marking mode into [RUN].
2.
The internal shutter of the laser marker is
opened by pressing "START", and the laser marker is ready for receiving trigger from external.
When pressing [STOP], the Internal shutter is closed, and the marking is finished.
The laser marker is performed the following procedure.
Trigger Marking to Still or Flying Object
Marking Mode: RUN
Press [START]
Internal Shutter: Open
(Ready for receiving external trigger)
Trigger Signal
Marking
Trigger Signal
Marking
Press [STOP]
Internal Shutter: Close
Reference
• When pressing [STOP] during marking, the internal shutter is closed after finishing marking all contents, and then RUN
mode is finished.
• Before starting the run mode, turn ON the laser pumping.
Equidistant Marking to Flying Object
Marking Mode: RUN
Press [START]
Internal Shutter: Open
(Ready for receiving external trigger)
Marking
Marking
Press [STOP]
Internal Shutter: Close
ME-LP400V-OP-6
Trigger Signal
(Keep Input ON)
139