Panasonic LP-V Series Operation And Maintenance Manual page 202

⿎ 2D Code Pattern Font
The 2D code pattern font shown below have been previously registered to the font installed in the CD-ROM.
Refer to "4-15-4 Font File" (P.244) to register the pattern fonts on the laser marker.
Font image
Character
2230 (HEX) 2231 (HEX) 2232 (HEX) 2233 (HEX) 2234 (HEX) 2235 (HEX) 2236 (HEX) 2237 (HEX)
code
Pattern type Quiet zone
Font image
Character
2238 (HEX) 2239 (HEX) 8121 (HEX) 8122 (HEX) 8123 (HEX) 8124 (HEX) 8125 (HEX) 8126 (HEX)
code
Quiet zone
Pattern type
Font image
Character
8127 (HEX) 8128 (HEX) 8129 (HEX) 812A (HEX) 812B (HEX) 812C (HEX) 812D (HEX) 812E (HEX)
code
Pattern type
Font image
Character
812F (HEX) 8130 (HEX) 8131 (HEX) 8132 (HEX) 8133 (HEX) 8134 (HEX) 8135 (HEX) 8136 (HEX)
code
Pattern type
Font image
Character
8137 (HEX) 8138 (HEX) 8139 (HEX) 813A (HEX) 813B (HEX) 813C (HEX) 813D (HEX) 813E (HEX)
code
Pattern type
Font image
Character
813F (HEX) 8140 (HEX) 8141 (HEX) 8142 (HEX) 8143 (HEX) 8144 (HEX) 8145 (HEX) 8146 (HEX)
code
Pattern type
Font image
Character
8147 (HEX) 8148 (HEX) 8149 (HEX) 814A (HEX) 814B (HEX) 814C (HEX)
code
Pattern type
Reference
• For 2D pattern font, a total of 60 fonts can be registered in any code from 2230 (HEX) to 2239 (HEX), or from 8121 (HEX)
to 8152 (HEX). When a new pattern font is created and registered, overwrite the font pattern registered in any code from
2230 (HEX) to 2239 (HEX), or from 8121 (HEX) to 814C (HEX), or register it on any code from 814D (HEX) to 8152 (HEX).
Do not use other character code.
• If a reading failure occurs with the standard pattern shown above (2DCODE.FON), use the font maker provided to create
the proper pattern. Refer to "Font Maker Operation Manual" for details.
202
Finder
Module Alignment
pattern
Border pattern
ME-LP400V-OP-6
Module
Module
Module
Module
Border pattern
Quiet zone