Panasonic LP-V Series Operation And Maintenance Manual page 171

Reference
• When the rank is set beforehand, the character string with the rank setting is changed and marked.
• In the case of setting coordinate of the external offset, input the parallel input value with coordinate and display image for
checking the offset. Before marking actually, it becomes convenient marking by checking offset.
⿎ Setting procedure of External Offset function
1.
Press [OFFSET] (EXTERNAL OFFSET) after
pressing [FUNCTION].
2.
Select the external offset condition between "Low
8 bit" and "Low 4 bit".
3.
The ten-key is appeared by pressing the input field of theta
offset, X offset or Y offset. Input the value, and press [SET].
ME-LP400V-OP-6
171