When Using Console (Option); When Using Monitor And Mouse - Panasonic LP-V Series Operation And Maintenance Manual

2-2-4 When Using Console (Option)

• When using the console LP-ADP40 (optional item), connect the return harness to the rear of the controller.
• Do not take out and put in the console in being powered on.
Front side of Controller
To CONSOLE

2-2-5 When Using Monitor and Mouse

• Be sure to check the operation status when using the monitor and mouse beforehand. This connection status does not
warrant all operations of VGA monitor and USB mouse.
• Do not take out and put in a monitor, and a mouse in being powered on.
• When using monitor and mouse, do not connect the return harness.
• USB hub cannot be used for this product.
• There is 1 port on the front of the controller and 2 ports on the back for USB connector A. USB mouse can be connected
in any of these ports.
• The connectable monitor and mouse are as follows:
Monitor: VGA terminal (15-pin 3-row) (Recommended Pixel Count: 640×480 or more)
Mouse: USB mouse with Human interface device (HID) class
76
To VGA OUT
Return Harness
LP-ADP40 (Option)
Monitor
To VGA OUT
Mouse
ME-LP400V-OP-6
Rear side of Controller
RETURN OUT
To (VGA+COM1) IN
Rear side of Controller
To USB Connector A