Controller - Panasonic LP-V Series Operation And Maintenance Manual

1-6-2 Controller

Front
LP-400 Series
1
1. Key Switch: POWER
This key switch is used to start the laser marker system.
Turn ON ( | ) the switch to start-up the system, and turn OFF ( o ) the switch to shutdown
the system.
When the laser marker is not used, remove the key, and the safety manager must keep it.
Since the ON/OFF operation of the key switch makes a load to the laser marker, leave
an interval for 5 seconds or more from turning OFF the power to turning ON the power
again.
Do not turn off the power supply while the system starts (during the system start indicator is flashing).
2. Controller display panel
The indicator that shows the status of laser radiation and the laser
marker.
No. Display name
FILE No. / ERROR CODE
q
MAIN
w
MARKING
e
2
6
3
4
5
7
8
9
10
Status
Normal state
Alarm or warning status
System is powered on
System under starting up
(uncompleted)
Being in laser emitting
ME-LP400V-OP-6
LP-V/LP-W Series
1 2
OFF
w
e
Indication
Displays selected file No.
Displays error code No. Refer to
"Error Indication" (P.301).
Green lighted-up
Green flashing
Orange lighted-up
6
3
4
5
7
8
9
10
ON
q
53