3. Set the conditions for Step & Repeat.
1.
Press [GENERAL].
Then, press [STEP and REP.].
2.
Check [Step and Repeat].
3.
Set "3" to [Number of Row].
Set "3" to [Number of Col.] (Number of Column).
4.
Set "10 mm" to [Row Step].
Set "18 mm" to [Column Step].
5.
Set "-20.000 mm" to [X Offset].
Set "20.000 mm" to [Y Offset].
6.
Press [IMAGE] to check the marking layout.
116
ME-LP400V-OP-6