Counter - Panasonic LP-V Series Operation And Maintenance Manual

4-9-2 Counter

With this function, the counter is increased or decreased per setting setup number from the initial value to end value for
each counter source.
Notice
• When the counter is interrupted by alarm occurrence etc., check the counter value for the next marking.
Reference
• The counter does not operate at test marking.
• The current value of the counter is saved without overwriting the file.
• After setting counter condition here, input the functional character of counter in the character setting screen. Refer to
"Counter" (P.155).
1
2
Description
1 Counter No.:
Enables to set 4 types of lot conditions from 0 to 3 per file.
Notice
• The counters 0 to 3 are commonly set per 256 file. For example, the counters 0 to 3 with file No. 0 are applied the
same counter of that of 256, 512, 768, 1024, 1536 and 1792 files.
Reference
• The common counter (common counters 4 to 7) are settable for all files in common. Refer to "4-13-3 Common
Counter" (P.235).
2 Curr (Current Value):
Current counter value. The current value is subsequently marked. Set the current value within the initial value and
end value.
Setting Range
164
3
0 to 999999
6
4 5
ME-LP400V-OP-6
7