Character Conditions - Panasonic LP-V Series Operation And Maintenance Manual

4-10-2 Character Conditions

1
Description
1 Char. Cond. No. (Character Condition No.) :
Specifies the number of condition to be set.
Setting Range
2 Line No. :
Specifies the line number of character strings to be marked corresponding to the condition number.
Setting Range
Reference
• Pressing [C] sets both start and end setting line No. with the same No. of the character condition No.
• The characters set at the common character setting correspond to the line numbers 51 to 60. If the character
conditions set there are to be changed, specify the setting line to any of them to set the character conditions.
3 Marking Shape :
Select from "Straight Line", "Proportional", "Justify", "Fan like form +", or "Fan like form -". The setting varies by
pressing this field.
4 Alignment :
Select from Center, Right, or Left. The setting varies by pressing this field.
5 Font :
Select the font from the registered character fonts. Refer to "4-15-4 Font File" (P.244).
The font can be selected for each condition number.
180
1 to 60
1 to 60
2
3
4
5
6
7
8
ME-LP400V-OP-6