Panasonic LP-V Series Operation And Maintenance Manual page 231

⿎ In case of marking studded character string:
Setting example:
Mark the characters at 100mm intervals with LP-V10U by using the concatenated marking function to the flying object.
(In this example, Y position is stable. The origin of the character string is set to be "Left", and the flying direction is set to be
"LEFT".)
Two-thirds of the marking field are concatenated with maximum 16 fields.
Set the marking layout in these fields as shown below figure.
f
• = Two-thirds of the marking field width
For LP-V10U (marking field width is 90mm),
a
• = Spacing of the marking characters
When the distance between the characters is 100mm,
1st line
Area No.: 0
f
A
Specify the marking condition of each line on the marking condition setting screen.
In this case, the character string on the 1st line is specified as "Condition No. 1, Area No. 0" and that on the 2nd line is
specified as "Condition No. 2, Area No. 1", and that on the 4th line is specified as "Condition No. 4, Area No. 3".
Set the X-position of each condition number (Area number) so that the characters are placed at regular intervals in the row
of two-third width of the marking field.
Setting Condition
Item
Character condition No.
X Position
Y Position
Area No.
f
= 60
2nd line
Area No.: 1
B
a
1st line 2nd line
1 2
-45 -5
0 0
0 1
ME-LP400V-OP-6
a
= 100
4th line
3rd line
Area No.: 3
Area No.: 2
C
a
3rd line
3
No character input
No character input
2
f
･･･
4th line
4
-25
0
3
231