Panasonic LP-V Series Operation And Maintenance Manual page 191

⿎ CODE39, ITF, CODE128, NW-7, EAN/UPC
1
2
4
6
9
10
CODE128, EAN/UPC
Description
1 Bar Code Height :
Specifies the height of bar code. The bar code height does not include the height of the human readable character.
For EAN / UPC code, the Bar Code Height does not include the height of the projected part of the guide bars and
the center bar.
1.000 to 90.000 mm
1.000 to 110.000 mm
Setting Range
1.000 to 160.000 mm
1.000 to 55.000 mm
2 Narrow Element Width :
Specifies narrow element width of the bar code.
Set the larger value than 'Line width' in laser setting screen.
Setting Range 0.050 to 1.000 mm
3 Quiet Zone / Narrow Element Ratio :
Ratio of the quiet zone to narrow element width. Specifying the number other than "0" here makes it possible to
view the image of the quiet zone if the inversion marking is not performed.
Setting Range 0.0 to 20.0
4 2X-4X Element Ratio (only for CODE128 / EAN / UPC) :
The ratio of double,triple,quadruple element to narrow element width.
Setting Range (2X)
Setting Range (3X)
Setting Range (4X)
Reference
• This setting does not appear when EAN/UPC codes or CODE 128 are set in the 1D side of composite codes.
5 Wide Element / Narrow Element Ratio (only for CODE39 / ITF / NW-7) :
Ratio of wide element to narrow element.
Setting Range 1.8 to 3.4
6 Invert :
Enable this function to mark the bar code inverted. Without inversion setting, only the bars are marked. With the
inversion setting, the quiet zone and space in the symbol section are marked.
3
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
1.4 to 2.6
2.1 to 3.9
2.8 to 5.2
7
8
ME-LP400V-OP-6
5
NW-7, CODE39, ITF
191