Programming Procedure - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS
The procedure for programming with icons is as follows.
■
1. Displaying the programming screen
At the Home screen, touch
The programming screen will be displayed.
◆ If you press when the following message is displayed, the sewing machine will operate and programs can then be
created.
Furthermore, if you press
applicable model and then touch
Touch to return to the Home screen.
◆ If the following message is displayed, press
last stopped. In addition, press
16

Programming procedure

.
at the above screen, the model selection screen (shown below) will be displayed, so select the
. At this time, you can create programs without operating the sewing machine.
to start again from the program which was not saved when operation was
to start creating a new program.
BAS H series, Programmer