Creating A Circle - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

Creating a circle

The following three options are available for creating a circle.
Specify a radius to create a circle (clockwise or counterclockwise)
Specify a diameter to create a circle (clockwise or counterclockwise)
1. Touch .
■
If
is selected
2. Touch or .
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
■
If
is selected
2. Touch .
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
24
4. Use the jog key to move the cursor
point, and then press
4. Use the jog key to move the cursor
point, and then press
5. Use the jog key to move the cursor
point, and then press
BAS H series, Programmer
to the second
.
to the second
.
to the third
.