List Of Code Settings - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

List of code settings

Name
Split
Intermittent presser foot
height
Thread tension (index)
Thread tension (tension)
Sewing speed
Low-speed
Option
output 1
Option
Option
output
output 2
Option
output 3
Option No.
Trigger
Sewing
machine stop
Thread trimming
*1 On when selected, off when not selected.
*2 When code display is set to "Show code" during sewing editing or checking, the icons are displayed in the top-left
of the screen.
The icons are always displayed during code setting.
48
Setting value
Needle Up/Needle Down
-10.0 - 10.0mm
(Setting units: 0.1mm)
0 - 9
0 - 500
200 - 2800sti/min
(Setting units: 100 sti/min)
(The maximum sewing speed is
limited to the above setting or
less)
0: Low-speed cancel
1: Limits the maximum sewing
speed to 1200 sti/min or less
2: Limits the maximum sewing
speed to 800 sti/min or less
3: Limits the maximum sewing
speed to 600 sti/min or less
4: Limits the maximum sewing
speed to 400 sti/min or less
ON/OFF *1
ON/OFF *1
ON/OFF *1
1 – 20
1 – 24 (BAS-360H, BAS-365H,
BAS-370H, BAS-375H)
Paused/Not Paused
Enabled/Disabled
BAS H series, Programmer
Icons*2 Notes
Setting is not possible for the
BAS-360H, BAS-365H, BAS-370H
and BAS-375H.
Setting is only possible for the
BAS-360H, BAS-365H, BAS-370H
and BAS-375H.
* Up to five can be set for each sewing
point.
* When the feed has been set, the end
point of the stitch is set automatically.