Examples Of The Extended Option Output - Brother BAS H Series Instruction Manual

Examples of the extended option output

To program the extended option output, prepare the timing chart. Then, set output conditions and enabling/disabling
conditions based on the chart.
The following examples describe how to develop program setting values based on the timing chart.
* No explanation of the operation of the sewing machine is provided.

Example 1
Sequence 1 for stacker
This sequence ejects material immediately after the work clamp rises on completion of sewing, and programs stacking
operation.
Option output 4
Option output 5
Option output 6
Timing chart
Program setting values
Output Operation
No. setting
4 ON
5 ON
6 ON
BAR1: For holding material
BAR2: For moving material
AIR: For air blow
1.2 sec
0.5 sec 0.7 sec
0.5 sec 1.7 sec
Rising of work clamp when sewing has been completed
Output condition
Timer 1
[ms]
Condition
Content
No.
Rising of
30 0
work clamp
76 Output 4 ON 500
76 Output 4 ON 500
BAS H series, Programmer
CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
Enabling conditions
Timer 2
[ms]
Condition
Content
No.
End of
1200 6
sewing
700
－ －
1700
－ －
Disabling conditions
Condition
Content
No.
Output 6
81
OFF
－ －
－ －
89