Brother BAS H Series Instruction Manual page 5

Use the programmer and the sewing machine in an
area which is free from sources of strong electrical
noise such as electrical line noise or static electric
noise.
Sources of strong electrical noise may cause
problems with correct operation of the programmer
and the sewing machine.
Any fluctuations in the power supply voltage should
be within ±10% of the rated voltage for the machine.
Voltage fluctuations which are greater than this may
cause problems with correct operation of the
programmer and the sewing machine.
The power supply capacity should be greater than
the requirements for the equipment's
consumption.
Insufficient power supply capacity may cause
problems with correct operation of the programmer
and the sewing machine.
Do not place the programmer on unstable surfaces
such as unsteady tables or high shelves, otherwise
it may tip over or fall down and cause injury.
Do not place heavy objects on top of the
programmer, otherwise it may become unbalanced
and tip over or fall down and cause injury.
The programmer and the sewing machine should
only be used by operators who have received
proper training.
Be sure to wear protective goggles when using the
sewing machine.
If goggles are not worn, there is the danger that if a
needle breaks, parts of the broken needle may
enter your eyes and injury may result.
CAUTION
Environmental requirements
power
Installation
During use
BAS H series, Programmer
The ambient temperature should be within the
range of 5 ° C to 35 ° C during use and storage.
Temperatures which are lower or higher than this
may cause problems with correct operation of the
programmer and the sewing machine.
The relative humidity should be within the range of
45% to 85% during use and storage, and no dew
formation should occur in any devices.
Excessively dry or humid environments and dew
formation may cause
operation of the programmer and the sewing
machine.
In the event of an electrical storm, turn off the power
and disconnect the power cord from the wall outlet.
Lightning may cause
operation of the programmer and the sewing
machine.
Turn off the power switch before connecting and
disconnecting the connector
machine, otherwise it may damage the programmer
and the control box.
Be sure to disconnect the connector for the sewing
machine when using the AC adapter, otherwise it
may cause problems with correct operation of the
programmer.
If a problem occurs with the operation of the
programmer or the sewing machine, contact the
place of purchase or a qualified technician.
problems with correct
problems with correct
for the sewing
iv