Saving With A Different Filename - Brother BAS H Series Instruction Manual

CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
【When overwriting an existing program number】
2. The program saving dialog screen will open, so
touch to overwrite the existing file.
Touch to return to the extended option
output settings.

Saving with a different filename

The extended option output created by the programmer can be saved into the panel internal memory with a different
name.
1. Touch .
* This is not displayed when "Single SEQ file
mode" in "Programmer" is set to "ON".
The save screen will open, so enter an extended
option output program number which is not yet
being used.
2. Touch .
The extended option output will be saved under the
different name and the display will return to the
extended option output settings.
If you would like to overwrite an existing program
number, enter an existing extended option output
program number at the save screen in step 1.
82
* The save screen is not displayed when "Single
SEQ file mode" in "Programmer" is set to "ON".
Furthermore, during single SEQ file mode, a
confirmation screen is displayed asking if you
would like to apply the extended option output
settings to the sewing machine immediately after
saving them.
A saving confirmation dialog screen will be
displayed, so touch
existing file.
Touch
output settings.
BAS H series, Programmer
to overwrite the
to return to the extended option