Creating A Semicircle; Creating An Ellipse - Brother BAS H Series Instruction Manual

Creating a semicircle

1. Touch .
2. Touch .

Creating an ellipse

1. Touch .
2. Touch .
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
4. Use the jog key to move the cursor
which you would like to set, and then press
4. Use the jog key to move the cursor
point on the long axis (short axis), and then press
.
Second point
5. Use the jog key to move the cursor
for the short axis (long axis), and then press
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
to the point
to the second
Start point
to the position
Start point
.
.
25