Table of Contents
Advertisement
CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
Opening the extended option output setting screen
Follow the procedure given below to display the extended option output settings.
1. Touch
on the programming screen.
2. A dialog box is displayed for you to select the type
of file to create.
3.
Select "New Extended Option Program", and then
touch
.
* When "Starting extended option editing directly" in "Programmer" is set to "ON", touch
display the extended option output setting screen.
Setting details of the extended option output
Specifying a value at the items below.
■ Extended option output No.
Use
to specify a single output number from 1 to 20 (1 to 24 for the BAS-360H, BAS-365H, BAS-370H
and BAS-375H).
* Refer to "Table of extended option output" (page 88).
■
Output conditions
Enter the extended option output conditions. You can enter up to three conditions: Off, On or Toggle.
* Refer to "Table of extended option output" (page 90).
■
Timer 1
Set a time until the output is switched after the output condition is established.
Set 0 or any value between 10 and 2550 ms by increments of 10 ms.
■
Timer 2
Set duration of the extended option output.
Set 0 or any value between 10 and 2550 ms by increments of 10 ms.
If you set 0, the switched output status is kept.
80
S
e
t
t
i
n
g
e
x
t
e
n
d
e
d
o
S
e
t
t
i
n
g
e
x
t
e
n
d
e
d
o
BAS H series, Programmer
p
t
i
o
n
o
u
t
p
u
t
p
t
i
o
n
o
u
t
p
u
t
The extended option output settings will open.
in the Home screen to
- Quick Links:
- Contents and Usage
- Part Names and Functions
Hide quick links:
Advertisement
Table of Contents
