Brother BAS H Series Instruction Manual page 84

CHAPTER 3 PROGRAMMING PATTERNS
3 ） When inserting a line while drawing a circle
[Before inserting straight line]
#1
1. Touch .
2. Use to move the cursor
* You can move the cursor continuously by holding down the key.
3. Touch .
4. Touch .
5. Touch to select "Insert".
6. Use the jog key to move the cursor to #1.
7. Press to provisionally set the start point.
8. Use the jog key to move the cursor
9. Press to provisionally set the sewing points.
* Repeat steps 8 and 9 until the shape of the pattern has been created.
10. Press to confirm the pattern.
76
[After inserting straight line]
to C.
to the position for the end point of the new pattern to be created.
BAS H series, Programmer
#2
#1